DENALI SoundBomb Compact Dual Tone Air Horn

TT-SB.10000. B

Inconspicuous styling, obnoxiously loud - that's a contradiction you'll only find in SoundBomb Horns. Don't sacrifice safety for style, because our blacked-out Horns practically disappear once installed.

The unique design of the compact Horn features a rugged molded clamp that mechanically mates the compressor to the acoustic unit. This makes the SoundBomb virtually indestructible even in high vibration applications.

  • Sound Output: 120 dB at 3 ft
  • Power Draw: 20 amps
  • Dimensions: 5.4 in x 4.5in x 3.6 in
  • Housing: Stylish All Black Design
  • CANbus compatible: Yes

(DETTSB10000B)

SKU DETTSB10000B
Barcode # 810000000000
Brand Denali Lighting
Shipping Weight 0.8250kg
Shipping Width 0.150m
Shipping Height 0.150m
Shipping Length 0.150m
Shipping Cubic 0.003375000m3
Unit Of Measure ea
Compulsory Horn
By: Rob on 11 May 2022
These amazing horns should be compulsory on every motorcycle, there is absolutely nothing else that sounds like them let alone as loud as them. I bought the split version ( horn and compressor are separate) as the combined unit not suited to my bike. Also with the horn I purchased the plug and play wiring harness ( don’t bother trying to do your own wiring as this harness is so simple to install and makes the end result look like a factory fitted item) and had the whole install done and dusted within 90 minutes. It really sounds that good that you will probably enjoy honking it more than rifing your bike
(5)
Denali Soundbomb COmpact
By: Brent Lowrey on 4 November 2021
"Compact" is a relative term, so make sure you scope out a suitable position to mount this unit before purchasing. If in doubt, I would recommend going for the model that splits the compressor and horn allowing you to mount them separately (in two smaller spaces). As for the unit itself... It's plenty loud, so that's a win. Once installed, it looks like it belongs; I am pleased with the end result, visually and aurally. The negatives... I don't love the bolt head retention method of attachment and would feel much more confident with a traditional through-bolt set up. The unit hasn't moved yet, but I've only ridden for about 10 km over decent surfaces. The other (ultimately minor) problem was confusion around wire polarity. Either the diagram was BS or the compressor was rotated about 150 degrees in its casing - all good after a bit of diagnosis.
(4)

Write a product review

Description

DENALI SoundBomb Compact Dual Tone Air Horn

TT-SB.10000. B

Inconspicuous styling, obnoxiously loud - that's a contradiction you'll only find in SoundBomb Horns. Don't sacrifice safety for style, because our blacked-out Horns practically disappear once installed.

The unique design of the compact Horn features a rugged molded clamp that mechanically mates the compressor to the acoustic unit. This makes the SoundBomb virtually indestructible even in high vibration applications.

  • Sound Output: 120 dB at 3 ft
  • Power Draw: 20 amps
  • Dimensions: 5.4 in x 4.5in x 3.6 in
  • Housing: Stylish All Black Design
  • CANbus compatible: Yes
Specifications
SKU DETTSB10000B
Barcode # 810000000000
Brand Denali Lighting
Shipping Weight 0.8250kg
Shipping Width 0.150m
Shipping Height 0.150m
Shipping Length 0.150m
Shipping Cubic 0.003375000m3
Unit Of Measure ea
Reviews
Compulsory Horn
By: Rob on 11 May 2022
These amazing horns should be compulsory on every motorcycle, there is absolutely nothing else that sounds like them let alone as loud as them. I bought the split version ( horn and compressor are separate) as the combined unit not suited to my bike. Also with the horn I purchased the plug and play wiring harness ( don’t bother trying to do your own wiring as this harness is so simple to install and makes the end result look like a factory fitted item) and had the whole install done and dusted within 90 minutes. It really sounds that good that you will probably enjoy honking it more than rifing your bike
(5)
Denali Soundbomb COmpact
By: Brent Lowrey on 4 November 2021
"Compact" is a relative term, so make sure you scope out a suitable position to mount this unit before purchasing. If in doubt, I would recommend going for the model that splits the compressor and horn allowing you to mount them separately (in two smaller spaces). As for the unit itself... It's plenty loud, so that's a win. Once installed, it looks like it belongs; I am pleased with the end result, visually and aurally. The negatives... I don't love the bolt head retention method of attachment and would feel much more confident with a traditional through-bolt set up. The unit hasn't moved yet, but I've only ridden for about 10 km over decent surfaces. The other (ultimately minor) problem was confusion around wire polarity. Either the diagram was BS or the compressor was rotated about 150 degrees in its casing - all good after a bit of diagnosis.
(4)

Write a product review